Lenox Contestor XL™
High-quality cutting of large, difficult to cut pieces of metal
INCREASED WEAR PROTECTION ENSURES LONGER BLADE LIFE
New HSS edge thread increases tooth hardness for better wear resistance
Patented chip control design reduces heat and wear
IMPROVED CHIP FORMATION HELPS PENETRATE HARD-TO-CUT METALS
Variable tooth heights and multi-level tooth setting ensure deeper, narrower chips
Large chip angle requires less cutting force
OPTIMISED DESIGN FOR STRAIGHTER CUTS ON LARGE BLOCKS
Shallow trench construction increases beam strength
Extra information
Application
Mold steels, Stainless steels, Tool steels, Titanium alloys, Nickel-based alloys (inconel)
Height
34 mm, 41 mm, 54 mm, 67 mm, 80 mm
Width
1.07 mm, 1.27 mm, 1.60 mm
Teeth per inch
2/3, 3/4, 4/6
Specifications & Application
| Width & thickness | TPI (teeth per inch) | |||||
|---|---|---|---|---|---|---|
| In millimetres | 0,7/1,0 | 1,0/1,3 | 1,4/2,0 | 2/3 | 3/4 | 4/6 |
| 34 x 1,07 | ✔ | ✔ | ✔ | |||
| 41 x 1,27 | ✔ | ✔ | ✔ | |||
| 54 x 1,60 | ✔ | ✔ | ✔ | ✔ | ||
| 67 x 1,60 | ✔ | ✔ | ✔ | |||
| 80 x 1,60 | ✔ | ✔ | ||||
